DSpace
 

KNUSTSpace >
Research Articles >
College of Architecture and Planning >

Please use this identifier to cite or link to this item: http://hdl.handle.net/123456789/1275

Title: Some Machining Qualities Of Selected Lesser-Used Timber Species Of Ghana
Authors: Addae-Mensah, A. G.
Ayarkwa, J.
Issue Date: 1998
Publisher: Ghana J. of Forestry
Citation: Ghana J. of Forestry, vol. 6
Abstract: In this paper, boring, shaping and turning characteristics of eleven lesser-used species (LUS) are presented. The results showed that, generally, the high-density species have better boring turning and shaping qualities than the low-density species. That is, whereas Afina (Strombosia glaucescens), Albizia (Albizia ferrugenia), Essia (Petersianthus macrocarpus) and Esa (Celtis mildbraedii) have superior machining qualities, Otie (Pycnanthus angolensis), Ceiba (Ceiba pentandra), Bediwonua (Canarium schweinfurthii) and Bombax (Bombax brevicuspe) do not have very high grade boring, turning and shaping characteristics. Furthermore, the results of the boring test do not seem to indicate any clear relationship between density of wood and the off-sizes in the bored holes. Keywords: Lesser-used species, machining properties ecological zones.
Description: This article is published by Ghana J. of Forestry in 1998.
URI: http://hdl.handle.net/123456789/1275
Appears in Collections:College of Architecture and Planning

Files in This Item:

File Description SizeFormat
Binder1.pdf3.18 MBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

 

Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - Feedback