Theses / Dissertations >
College of Engineering >
Please use this identifier to cite or link to this item:
|Title: ||An analysis of productivity and cost efficiency of underground labour at George Capendel Shaft of Ashanti Goldfields Corporation (Ghana) Limited|
|Authors: ||Frimpong, Mensah|
|Issue Date: ||3-Sep-1990|
|Series/Report no.: ||1758;|
|Abstract: ||The treatise analyses the possibilities of increasing productivity at optimum cost. The study revealed that labour motivation at AGC is quite low. Job-centered style of supervision, machine downtime poor environmental conditions and labour unrest are among the factors hindering productivity.
Productivity is analysed terms of tons or advance per man-shift. Production efficiency is the ratio of actual to the programmed productivity whereas cost efficiency is the ratio of forecast cost to
the actual. The mean actual productivities of the various stopes were; for cut – and – fill (conventional) stopes (2 t/m-s), cut – and – fill (machinised) stopes (2.5 t/m-s), sublevel are 3. t/m-s, 8 t/m-s, 3.2 t/m-s respectively, and 2.5 t/m-s for shrinkage stopes. At development ends, mean productivities were 0.61 feet/man-shift for raises and 0.875 feet/man-shift for lateral development
The percent-age contribution of the operating cost of mining by the various cost centers are ; stoping cost (36.56%) , slope preparation cost ( 13. 18%) -. slope development cost (26. 96%) and 2 3% for the working cost.. The study also revealed a decline in performance of AGC in terms of cost from 1980/81 to date.|
|Description: ||A thesis submitted to the Board of Postgraduate Studies, Kwame Nkrumah University of Science and Technology, Kumasi, in partial fulfilment of the requirements for the award of Postgraduate Diploma in Mining Engineering, 1990|
|Appears in Collections:||College of Engineering|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.