Borehole yield estimation from electrical resistivity measurements – a case study of Garu Tempane and Bawku West Districts, Upper East Region, Ghana

Loading...
Thumbnail Image
Date
May, 2017
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Electrical resistivity survey has proven to be an effective tool for groundwater exploration and has been widely embraced to help reduce the drilling of unsuccessful wells. Currently, information from electrical resistivity survey is often used in locating points for drilling, but it does not give indication of the yield of the borehole. The lack of this information therefore sometimes results in the drilling of dry and marginal wells. This study therefore looks at the possibility of using resistivity data, which is readily available from electrical resistivity surveys for groundwater exploration, for estimating the yield of yet to be drilled borehole. The study was limited to the Garu Tempane and Bawku West districts. Secondary data on vertical electrical sounding (VES) and drill logs for 49 boreholes in the selected districts were used. The thicknesses, apparent resistivities, longitudinal conductance and transverse resistance of the various subsurface layers of the boreholes were determined from drill logs and VES data. Correlations between borehole yields and the third layer apparent resistivity, longitudinal conductance and transverse resistance were then investigated to develop regression models for estimation of the borehole yields. The results showed that the third layer is fractured and contributes significantly to borehole yields in the area; hence the fractured subsurface layer is of primary interest to be considered in groundwater exploration and estimating potential borehole yield from VES data. The results obtained further indicated that apparent resistivity, longitudinal conductance and transverse resistance had good exponential and positive linear relationships with borehole yield.
Description
A thesis submitted to the Department of Geological Engineering, Kwame Nkrumah University of Science and Technology in partial fulfilment of requirements for the award of the degree of Master of Science in Geophysical Engineering.
Keywords
Citation