Screening of six local sorghum varieties for their malting and brewing qualities
Loading...
Date
2008-08-05
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Six locally available sorghum varieties were assessed for their malting and brewing qualities. With the exception of Chere, all varieties had suitable 1000 corn weights (>25 g). The differences in corn weights were also significant (p<0.05). Analysis of Germination energy (GE) and Germinative capacity (GC) gave results of >90 % for each variety, signifying their viability. Nitrogen content ranging from1.67 %-2.03 % was obtained for the varieties studied in their unmalted state. Results obtained for malted samples ranged between 1.38 %-1.89 %. With the exception of Dorado (fat 0.96 %), other varieties studied gave high fat contents (i.e. >1.0 %) for the malts. Significant differences were obtained for the malting losses. This ranged between 15.75 % (for Kapaala) and 28.06 %( for Chere). Strong correlation existed between malting loss and Diastatic power (DP) (r=0.803). DP levels for varieties studied indicated that Kapaala (40.07 oWk) was the least modified whiles Chere (60.3 oWk) was the most modified. Differences in DP between varieties studied were significant (p<0.05). The mashing regime and results obtained for Cold water extract (CWE), hot water extract (HWE) and filtration rates showed that all the varieties studied need to be pre-gelatinised before being added to barley malt mash as none gelatinised within malt enzyme temperature range (i.e. 60 OC-70 OC). Results further showed that Kapaala had the highest potential extract (77.94 %) while Sample1 (71.01 %) had the least. In all, the HWE for all the varieties studied ranged between 71.01 % and 77.94 %. Response of mashes to starch check level showed that none of the varieties gelatinises at a temperature suitable for the endogenous amylases. Thus, use of exogenous enzymes or barley malt part mash is required to hydrolyse the sorghum malt starch during the brewing process.
Description
A thesis Submitted as a partial fulfilment of the requirement for the award of Master of Science Degree in Food Science and Technology.